Electric Heater, Wall/Ceiling/Tripod Infrared Patio Heater
The Electric Heater, Wall/Ceiling/Tripod Infrared Patio Heater pushes the usable outdoor season further into the cold months. It is specified for residential use rather than light seasonal duty.
Materials are selected for outdoor service life, with protected fasteners and finishes rated for continuous exposure. Controls are simple and reachable without leaning over the heat source. The footprint is drawn to sit comfortably in a standard residential yard without crowding the space around it. Hardware is bagged by step, and the instructions are written around the order the parts actually go together. Finishes are applied before shipping, which means no staining or sealing before the first use. Weight is distributed so the assembled structure sits stable without needing to be over-anchored. Ground clearance and drainage are considered in the design rather than left to the installer. Structural connections are bolted rather than nailed where the load actually concentrates.
It works on a patio, a deck, or under a covered structure with adequate clearance. A level base and one extra person make the build straightforward. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Meet Electric Heater, Wall/Ceiling/Tripod Infrared Patio Heater
This infrared heater mounts to a wall, a ceiling, or the included tripod, so it fits almost any outdoor or covered space. Fifteen hundred watts of steady radiant heat keeps you warm without an open flame.
Wall, ceiling or tripod, this 1500W infrared heater adapts to whatever spot in a small patio or covered porch actually needs warmth.
It carries CSA certification and delivers steady infrared warmth, built for both indoor and outdoor use so it fits a covered patio or a garage alike.
Controls are simple and reachable without leaning over the heat source, and the footprint is sized to sit comfortably in a standard residential yard.
The Electric Heater, Wall/Ceiling/Tripod Infrared Patio Heater pushes the usable outdoor season further into the cold months. It is specified for residential use rather than light seasonal duty.
Materials are selected for outdoor service life, with protected fasteners and finishes rated for continuous exposure. Controls are simple and reachable without leaning over the heat source. The footprint is drawn to sit comfortably in a standard residential yard without crowding the space around it. Hardware is bagged by step, and the instructions are written around the order the parts actually go together. Finishes are applied before shipping, which means no staining or sealing before the first use. Weight is distributed so the assembled structure sits stable without needing to be over-anchored. Ground clearance and drainage are considered in the design rather than left to the installer. Structural connections are bolted rather than nailed where the load actually concentrates.
It works on a patio, a deck, or under a covered structure with adequate clearance. A level base and one extra person make the build straightforward. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Wipe the housing with a damp cloth and keep the element free of debris. Cover or bring the tripod base indoors during long stretches of wet weather. Recheck mounting hardware each season, since it is finished before shipping and never needs refinishing.
Rates and timing shown at checkout
Talk to someone before you buy
See our return policy for details
Encrypted and safe checkout
Yes, it is designed for wall, ceiling or tripod mounting, so you can pick whatever setup suits your patio or porch.
Yes, it is rated for residential indoor and outdoor use and carries CSA certification.
It delivers steady infrared warmth suited to a patio, deck or covered structure with adequate clearance.
Hardware is bagged by step with instructions written around the order parts actually go together, so a level base and one extra person make the build straightforward.
Keep it clear of combustible materials and follow all clearance requirements, never leaving it unattended around children or pets.
Level, firm ground that will not shift under the legs, such as a patio, a deck or compacted paving. On soft grass the legs can sink unevenly and the head ends up aimed somewhere you did not intend. Spread the legs fully and check the unit sits steady before you switch it on.
It runs on household electricity, so you need a suitable outdoor socket within reach of the position you have chosen. Keep the connection point dry and off the ground, and use an outdoor rated lead if you need to extend the reach. If you are adding a new outdoor socket, have an electrician do it.
Materials and fasteners are specified for continuous outdoor exposure, so a wall or ceiling mounted unit can live where it is fixed. What matters more is keeping the electrical connection dry and sheltered. A tripod mounted unit is better brought under cover when heavy weather sets in.
Infrared warms the people and surfaces it points at rather than heating the air around it, so a passing breeze does not carry the warmth away the way it does with a convection heater. That makes it a sensible choice for an open terrace or a rooftop. On a tripod, make sure the legs are stable before wind picks up.
Yes, and the mounting options make that easy if you have gone with the tripod rather than a fixed wall or ceiling position. Unplug it, let it cool, wipe it down and keep it somewhere dry until the evenings turn again. A fixed unit can stay where it is without any seasonal treatment.
Long lasting and built for the outdoors
Pieces that still look right in ten years
Clear instructions and accurate sizing
