Meet a propane heater built to push the season later into the year, with coated metal framing that shrugs off sun, rain and temperature swings. Wheels make it easy to move exactly where the warmth is needed.
Metal Sparkling Gray Propane Gas Heater w/ Wheels, ETL
Gray / 85.4 In
$188.99 USD
Skip to product information
Metal Sparkling Gray Propane Gas Heater w/ Wheels, ETL
$188.99 USD
Wheels roll it wherever your patio needs heat
Coated metal shrugs off rain and sun
ETL certified for safe city patio use
Description
The Metal Sparkling Gray Propane Gas Heater w/ Wheels, ETL adds real warmth to a patio when the temperature drops. It is specified for residential use rather than light seasonal duty.
Coated metal framing gives the structure its rigidity and shrugs off sun, rain, and temperature swings. Output and clearances are published so you can site it safely. The structure is engineered to shed water and resist standing moisture at the joints, where outdoor builds usually fail first. Tolerances are held tight enough that panels line up on the first try instead of needing to be forced. Replacement parts and hardware remain available, so a single damaged component does not mean replacing the whole unit. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Ground clearance and drainage are considered in the design rather than left to the installer.
It works on a patio, a deck, or under a covered structure with adequate clearance. Set aside a weekend, check your site is level, and have a second set of hands available. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
- Category: Heater
- Primary material: Metal
- Finish: Gray
- Assembly: Required; hardware and instructions included
- Use: Residential outdoor
- Shipping: Freight or parcel depending on size
Real heat for cool city nights
When the temperature drops on a city patio or rooftop, this heater brings real warmth exactly where you are sitting, with output and clearances published so you can site it safely in a small outdoor space.
Built to handle patio weather
Coated metal framing gives it rigidity and shrugs off sun, rain and temperature swings, while the structure is engineered to shed water and resist standing moisture at the joints where outdoor pieces usually fail first.
Wheels make it easy to move
Wheels mean you can roll it from a shaded corner to the middle of the patio in seconds, and tight tolerances keep every panel lined up so setup stays simple.
Product details
The Metal Sparkling Gray Propane Gas Heater w/ Wheels, ETL adds real warmth to a patio when the temperature drops. It is specified for residential use rather than light seasonal duty.
Coated metal framing gives the structure its rigidity and shrugs off sun, rain, and temperature swings. Output and clearances are published so you can site it safely. The structure is engineered to shed water and resist standing moisture at the joints, where outdoor builds usually fail first. Tolerances are held tight enough that panels line up on the first try instead of needing to be forced. Replacement parts and hardware remain available, so a single damaged component does not mean replacing the whole unit. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Ground clearance and drainage are considered in the design rather than left to the installer.
It works on a patio, a deck, or under a covered structure with adequate clearance. Set aside a weekend, check your site is level, and have a second set of hands available. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
- Category: Heater
- Primary material: Metal
- Finish: Gray
- Assembly: Required; hardware and instructions included
- Use: Residential outdoor
- Shipping: Freight or parcel depending on size
- Coated metal framing resists weather damage
- Wheels for easy repositioning around the patio
- Engineered to shed water at the joints
- Tight tolerances so panels line up easily
- Replacement parts and hardware stay available
- Site drainage considered in the design
Specifications
- Material
- Coated metal
- Assembly
- Required, hardware and instructions included
Care and cleaning
Wipe down the metal housing after rain and let it dry before covering. Check hardware periodically and tighten any bolts that loosen with use. Store or cover it through wet stretches to protect the finish.
Shipping
Rates and timing shown at checkout
Real support
Talk to someone before you buy
Returns
See our return policy for details
Secure payments
Encrypted and safe checkout
Questions before you buy
Is this heater sized for a small city patio?
Yes. Output and clearances are published so you can site it safely on a compact patio, deck or rooftop without crowding your seating area.
What is the heater made from?
The frame is coated metal in a sparkling gray finish, chosen to hold up against sun, rain and temperature swings without rusting or fading.
How hard is assembly?
Plan on a weekend with a second set of hands. Hardware and instructions are included, and tight tolerances mean the panels line up on the first try.
Where can I use it?
It works on a patio, a deck or under a covered structure with adequate clearance, and the wheels make it simple to reposition as the sun moves.
How durable is the build over time?
The design accounts for expansion and contraction so joints stay tight through temperature swings, and replacement parts remain available if a component ever needs swapping.
What fuel does it run on?
It runs on propane from a cylinder, which is bought separately and refilled locally. Check the cylinder requirements in the instructions before you buy one, and connect it following the steps given. Store and handle the cylinder according to the rules where you live.
How much clearance does it need overhead and around it?
Keep the clearances published in the instructions above it and on every side. That matters most under an awning, a pergola or a low branch, where the space overhead is easy to underestimate. Anything that can burn, including fabric shades and cushions, should stay outside that distance.
Can I move it around the patio?
It has wheels, so it can be tilted and rolled to a new spot on a smooth, level surface. Only move it when it is off and fully cool, and disconnect the cylinder if the instructions ask you to. On grass or gravel the wheels will not do much, so plan the route.
How does it cope with wind?
Wind pulls at the flame and at a tall unit, so on an exposed patio site it where a wall or a screen breaks the gusts while still keeping the published clearances. Shut it off when conditions get strong rather than trying to shield it. Never leave it running unattended in any weather.
How do I clean it and put it away for the season?
Wipe the coated metal down with mild soap and water and dry it off, keeping abrasives away from the finish. Disconnect the cylinder before storing, and keep the cylinder outdoors and upright as your local rules require. A cover, or a spot under shelter, keeps water out of the burner area between seasons.
Durable materials
Long lasting and built for the outdoors
Timeless designs
Pieces that still look right in ten years
Straightforward setup
Clear instructions and accurate sizing