Patio Heater- 87'' Tall Stainless Steel AZ Patio Heater w
The Patio Heater- 87'' Tall Stainless Steel AZ Patio Heater w pushes the usable outdoor season further into the cold months. It is specified for residential use rather than light seasonal duty.
A powder-coated steel frame carries the load, resisting rust and holding its finish through repeated freeze-thaw cycles. Output and clearances are published so you can site it safely. Components are shipped in protective packaging and inventoried against a parts list included in the box. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Packaging is organized by assembly stage, which keeps a large parts count from becoming confusing. Edges and contact points are finished smooth, with no raw cuts left where hands go. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it.
It works on a patio, a deck, or under a covered structure with adequate clearance. Set aside a weekend, check your site is level, and have a second set of hands available. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Meet Patio Heater- 87'' Tall Stainless Steel AZ Patio Heater w
An 87 inch AZ Patio Heaters column finished in stainless steel and built to publish its output and clearances plainly. Every panel and fastener arrives pre cut and labeled, so assembly follows a clear sequence.
Standing 87 inches tall, this heater throws warmth across a wider group, making it a good fit for a patio gathering rather than just a single seat.
A powder coated steel frame resists rust and holds its finish through repeated freeze thaw cycles, so it keeps performing through humid city summers and cold snaps alike.
The built in table gives you a spot for drinks or a plate right at the heater, so you are not reaching across the group for a side table.
The Patio Heater- 87'' Tall Stainless Steel AZ Patio Heater w pushes the usable outdoor season further into the cold months. It is specified for residential use rather than light seasonal duty.
A powder-coated steel frame carries the load, resisting rust and holding its finish through repeated freeze-thaw cycles. Output and clearances are published so you can site it safely. Components are shipped in protective packaging and inventoried against a parts list included in the box. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Packaging is organized by assembly stage, which keeps a large parts count from becoming confusing. Edges and contact points are finished smooth, with no raw cuts left where hands go. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it.
It works on a patio, a deck, or under a covered structure with adequate clearance. Set aside a weekend, check your site is level, and have a second set of hands available. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Wipe the stainless steel frame with a damp cloth after each use. Check joints for moisture before lighting each season. Store covered during long stretches of rain or snow.
Rates and timing shown at checkout
Talk to someone before you buy
See our return policy for details
Encrypted and safe checkout
It stands 87 inches tall, sized to throw warmth across a wider group rather than a single seat. Confirm your ceiling clearance if it will sit under a covered structure.
It uses a powder coated steel frame that resists rust and holds its finish through repeated freeze thaw cycles, with output and clearances published so you can site it safely.
Yes, a table is built into the base, giving you a real surface for drinks or a plate right at the heat source.
Components are shipped in protective packaging and organized by assembly stage, with every panel and fastener pre cut and clearly labeled. Set aside a weekend and have a helper on hand for the larger panels.
Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around the hot surfaces.
Once it is set up, it becomes the spot people naturally gather around as the evening cools, with a side table right there for drinks or a plate so nobody has to step away from the warmth. It fits into a normal evening routine rather than needing to be dragged out and set up each time.
The powder coated steel frame resists rust through repeated freeze thaw cycles and the design accounts for expansion and contraction, so joints stay tight as the weather shifts. Occasional rain exposure is expected, though moving it under cover for extended storms helps it last even longer.
Let it cool fully, disconnect the fuel source, and store it in a dry spot if you are not using it through the colder months. The corrosion resistant build holds up well season to season, and dry storage between uses just adds to that.
A level, stable base such as a patio or deck keeps the tall frame standing the way it was designed to. Setting it up on solid, flat ground is really the main requirement before you start assembly.
It is sized to warm a seating area or table setting nearby rather than a whole yard, with published output and clearance information that helps you position it at the right distance from where people are sitting. Positioning it close to the group is what makes the warmth noticeable.
Long lasting and built for the outdoors
Pieces that still look right in ten years
Clear instructions and accurate sizing
