Portable Patio Heater, Propane Table Top Heater, Bronze
The Portable Patio Heater, Propane Table Top Heater, Bronze adds real warmth to a patio when the temperature drops. It is specified for residential use rather than light seasonal duty.
Materials are selected for outdoor service life, with protected fasteners and finishes rated for continuous exposure. Controls are simple and reachable without leaning over the heat source. Replacement parts and hardware remain available, so a single damaged component does not mean replacing the whole unit. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Ground clearance and drainage are considered in the design rather than left to the installer. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it. Hardware is bagged by step, and the instructions are written around the order the parts actually go together.
It works on a patio, a deck, or under a covered structure with adequate clearance. Plan for a level, well-drained site and a helper for the larger panels. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Meet Portable Patio Heater, Propane Table Top Heater, Bronze
This table top heater brings real warmth to a small patio, balcony, or dining spot. Portable and propane fueled, it sets up in minutes and heats the space right around where you are sitting.
Sized for a table rather than a floor, this propane heater adds real warmth to a small balcony or patio seating area without taking up floor space.
Controls sit within easy reach without leaning over the heat source, and the base is designed with ground clearance and drainage in mind so it stays stable outdoors.
The bronze finish sits well against most outdoor furniture, so it reads as part of the setup rather than an obvious add on.
The Portable Patio Heater, Propane Table Top Heater, Bronze adds real warmth to a patio when the temperature drops. It is specified for residential use rather than light seasonal duty.
Materials are selected for outdoor service life, with protected fasteners and finishes rated for continuous exposure. Controls are simple and reachable without leaning over the heat source. Replacement parts and hardware remain available, so a single damaged component does not mean replacing the whole unit. The design accounts for expansion and contraction, so joints stay tight through temperature swings. Ground clearance and drainage are considered in the design rather than left to the installer. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it. Hardware is bagged by step, and the instructions are written around the order the parts actually go together.
It works on a patio, a deck, or under a covered structure with adequate clearance. Plan for a level, well-drained site and a helper for the larger panels. Keep the unit clear of combustible materials, follow all clearance requirements, and never leave an open flame or heating element unattended. Supervise children and pets around hot surfaces.
Wipe the housing with a damp cloth once it has cooled completely. Disconnect and store the propane canister properly between uses. Check fasteners each season since joints see the most temperature swings.
Rates and timing shown at checkout
Talk to someone before you buy
See our return policy for details
Encrypted and safe checkout
It is built for a table sized seating area, so it suits a small balcony, patio corner or rooftop nook rather than a full open deck.
Yes, it is a propane tabletop heater, so there is no cord to run and no outlet to find on the patio.
Assembly is required but straightforward, with hardware bagged by step and instructions written around the order the parts actually go together.
Yes, its portable tabletop design makes it easy to shift between a dining table, a side table or a different corner of the patio.
Materials are selected for outdoor service life, with protected fasteners and finishes rated for continuous exposure to sun and moisture.
A solid, level table that can take heat, such as stone, concrete or a metal topped outdoor table. Bare timber, plastic and anything with a cloth on it are not the place for it. If you are unsure about the top, put a heat resistant mat underneath.
Keep the space above it open, so no parasol, no low canopy and nothing overhanging the table. Around the sides, keep planting, cushions, napkins and anything else that burns well outside the clearance published with the unit. Work to those figures rather than to a guess.
That is what a table top unit is for, but it wants to sit in the center where nobody leans across it. Keep it away from the edges and out of the path of anyone reaching for a plate. Never leave it lit with nobody watching it.
It is a live flame at table height, which puts it closer to reach than a tall tower or a ground level fire pit. The surfaces get hot in use, so supervise children and pets the whole time it is lit. Keep it central on the table and out of reach of the edges.
Shut it off, disconnect the fuel and let every surface cool before you move it anywhere. A dry cupboard, shed or covered storage box keeps rain and grit off the burner and the controls. Keep the fuel stored separately and outdoors rather than in an enclosed space.
Long lasting and built for the outdoors
Pieces that still look right in ten years
Clear instructions and accurate sizing
