Skyfort II With Spiral Tube Slide
The Skyfort II With Spiral Tube Slide adds another way for kids to play in the backyard. It comes from Backyard Discovery, and it is specified for residential use rather than light seasonal duty.
Kiln-dried timber forms the structure, pre-cut and pre-stained so the assembled result is square and consistent. Contact surfaces are finished smooth and hardware is recessed where children reach. Structural connections are bolted rather than nailed where the load actually concentrates. The structure is engineered to shed water and resist standing moisture at the joints, where outdoor builds usually fail first. The finish is applied for UV stability, so color holds rather than chalking out after a season in full sun. Edges and contact points are finished smooth, with no raw cuts left where hands go. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it.
It adds to an existing play area or stands on its own in a smaller yard. Set aside a weekend, check your site is level, and have a second set of hands available. Adult supervision is required whenever children are using this product. Install on a level surface over an approved protective surfacing material, check hardware and moving parts before each season, and follow the manufacturer's age and weight guidelines.
Meet Skyfort II With Spiral Tube Slide
The Skyfort II With Spiral Tube Slide adds another way to play, built with bolted joints where load concentrates. Contact surfaces are finished smooth and hardware is recessed, so there is nothing sharp where hands and feet go.
Structural connections are bolted rather than nailed where the load actually concentrates, so the frame holds up to real climbing and sliding.
The structure is engineered to shed water and resist standing moisture at the joints, which is where outdoor builds usually fail first.
Contact surfaces are finished smooth and hardware is recessed where children reach, so the spiral slide feels safe up close, not just sturdy overall.
The Skyfort II With Spiral Tube Slide adds another way for kids to play in the backyard. It comes from Backyard Discovery, and it is specified for residential use rather than light seasonal duty.
Kiln-dried timber forms the structure, pre-cut and pre-stained so the assembled result is square and consistent. Contact surfaces are finished smooth and hardware is recessed where children reach. Structural connections are bolted rather than nailed where the load actually concentrates. The structure is engineered to shed water and resist standing moisture at the joints, where outdoor builds usually fail first. The finish is applied for UV stability, so color holds rather than chalking out after a season in full sun. Edges and contact points are finished smooth, with no raw cuts left where hands go. Every panel and fastener arrives pre-cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it.
It adds to an existing play area or stands on its own in a smaller yard. Set aside a weekend, check your site is level, and have a second set of hands available. Adult supervision is required whenever children are using this product. Install on a level surface over an approved protective surfacing material, check hardware and moving parts before each season, and follow the manufacturer's age and weight guidelines.
5 year limited
Wipe the play structure down with mild soap and water and let it dry before use. Check bolted joints and hardware before each season and tighten anything that has loosened. Reapply a wood sealant every couple of years to protect against sun and moisture.
Rates and timing shown at checkout
Talk to someone before you buy
See our return policy for details
Encrypted and safe checkout
Structural connections are bolted rather than nailed where the load actually concentrates, giving the frame more holding strength where it counts.
No. The structure is engineered to shed water and resist standing moisture at the joints, which is where outdoor builds usually fail first.
Contact surfaces are finished smooth and hardware is recessed where children reach, with no raw cuts left where hands go.
The finish is applied for UV stability, so color holds rather than chalking out after a season in full sun.
Every panel and fastener arrives pre cut and clearly labeled, so assembly is a matter of following the sequence rather than solving it.
It is designed to be assembled as a fixed structure on site, so it is meant to stay where it is built rather than being moved casually. A later relocation would involve partly disassembling it and rebuilding on the new site.
A level, well drained site is what it is built for, with an approved protective surfacing material underneath since kids will be climbing and sliding around it. A level base also keeps the assembly straightforward from the start.
Before kids start using it again each season, check that hardware and connections are still tight, look over the slide surface for rough spots, and confirm the surfacing underneath is still in good shape. A quick seasonal check catches most issues early.
It is meant to add onto an existing play area or stand on its own, so many additional Backyard Discovery accessories are designed to work with compatible attachment points. Check specific mounting details before adding anything so the structure stays balanced.
It is sized for backyard use with enough room for more than one child to be active on it at a time, whether that means climbing the structure while another kid takes a turn on the slide.
Long lasting and built for the outdoors
Pieces that still look right in ten years
Clear instructions and accurate sizing
